Double spindle double turret turning and milling compound machine tool
Adopting a dual-spindle layout, arranged oppositely,
Two sets of turrets are arranged up and down, and the upper turret has a Y-axis.
CX200
Double spindle double turret turning and milling compound machine tool
Adopting a dual-spindle layout, arranged oppositely,
Two sets of turrets are arranged up and down, and the upper turret has a Y-axis.
Product features
01
The CX200 dual-spindle dual-turret turning and milling compound machine tool adopts a dual-spindle layout, arranged oppositely, with two sets of turrets arranged up and down, and the upper turret has a Y-axis. The machine tool’s unique dual-channel control system can realize dual-spindle, dual-turret and four-axis linkage processing. The sub-spindle continues to clamp the workpiece from the main spindle, and continues processing the clamped end to complete the entire processing process of the workpiece.
02
It can complete processes such as turning, drilling, milling and even grinding of some complex-shaped precision parts. Two different parts can also be turned and milled simultaneously.
03
A single turret can hold up to 24 knives, with short tool changing time and low failure rate. A variety of cutting tools can be installed according to the needs of different processing components.
04
The power tools configured in the machine tool can hold end mills, disc milling cutters, drills and other tools, and can be installed horizontally, vertically, tilted and other installation positions to facilitate the composite processing of parts from various directions.
05
The unique inclined bed structure of the machine tool facilitates chip discharge and coolant circulation.
06
The machine tool can be equipped with additional functional components such as automatic feeders and splicing machines to form a flexible processing production line.
Specifications
| Spindle through aperture | Φ66mm |
| Spindle bearing diameter | NN3020+100BAR+NN3018 |
| Hydraulic cylinder bore | 8′ |
| Spindle nose | A 2-6 |
| Spindle motor power | 22kW |
| Spindle transmission mode | Direct drive |
| Spindle transmission ratio | 1:01 |
| Spindle speed | 4300rpm |
| Spindle rated output speed | 2320rpm(220V) |
| Spindle through aperture | Φ56mm |
| Spindle bearing diameter | 7016/P4 |
| Hydraulic cylinder bore | 6′ |
| Spindle nose | A 2-5 |
| Spindle motor power | 17.5kW(220V) |
| Spindle transmission mode | Direct motor |
| Spindle transmission ratio | 1:01 |
| Spindle speed | 5500rpm(220V) |
| Spindle rated output speed | 2700rpm(220V) |
| Turret model | BMT65 |
| Powered turret capacity (front and back knives) | 24×2 |
| Power turret motor power | 7.5/5.5/3kW（FANUC） |
| Powered turret motor torque | 40/24/16Nm（FANUC） |
| Drive motor (tool change) | Huichuan |
| Tool changing speed (adjacent knife/opposite edge knife) | 0.4s/1s |
| Square tool | 25mm |
| Round cutter | Φ40mm |
| Powered Turret Tool Specifications | ER32(3~22mm) |
| Power tool holder speed | 5000rpm |
| X/Y/Z axis maximum travel | 175 mm |
| 70 mm | |
| 515(Z1、Z2)/600(Z3) mm | |
| X/Y/Z axis rapid feed | 20m/min |
| X/Y/Z axis slide rail form | 35/35/45mm linear rail |
| X/Y/Z axis servo motor rated torque | 4.5kW |
| X/Y/Z axis ball screw diameter/pitch | Φ40mm/Pitch10 |
| X/Y/Z axis repeat positioning accuracy | 0.005mm |
| Standard controller | FAUNC OI-TF |
| Voltage/power requirements | 380V/55kVA |
| Hydraulic tank capacity | 80L |
| Coolant motor power | 1.5kW |
| Machine weight | 8500kg |
| Appearance size (L× W× H) | 3050×2250×2200mm |
